Thaweesak的作品

最相关最新下载最多
共904个相关结果
最相关最新下载最多
筛选
检查员使用无损检测（NDT）中的工艺超声波检测（UT）检查钢管焊接附加接头的缺陷

ID:570930561 检查员使用无损检测（NDT）中的工艺超声波检测（UT）检查钢管焊接附加接头的缺陷

检查员正在对焊接钢梁附加接头进行无损检测（NDT）的过程超声测试（UT）以检查缺陷

ID:573562556 检查员正在对焊接钢梁附加接头进行无损检测（NDT）的过程超声测试（UT）以检查缺陷

检查员正在使用超声波检测技术检查焊接钢 H 型梁附加接头的缺陷

ID:586702799 检查员正在使用超声波检测技术检查焊接钢 H 型梁附加接头的缺陷

检查员正在使用无损检测（NDT）的超声波测试（UT）检查焊接钢 H 型钢附加接头中的缺陷

ID:568452873 检查员正在使用无损检测（NDT）的超声波测试（UT）检查焊接钢 H 型钢附加接头中的缺陷

Close-up of a damaged remote control for an overhead crane, showing worn and broken buttons inside an industrial factory setting.

ID:1762280697 Close-up of a damaged remote control for an overhead crane, showing worn and broken buttons inside an industrial factory setting.

Porosity or Cluster Porosity in Welded, Defect of Welding with Process Flux Cored Arc Welding (FCAW).

ID:1762280680 Porosity or Cluster Porosity in Welded, Defect of Welding with Process Flux Cored Arc Welding (FCAW).

Porosity or Cluster Porosity in Welded, Defect of Welding with Process Flux Cored Arc Welding (FCAW).

ID:1762280676 Porosity or Cluster Porosity in Welded, Defect of Welding with Process Flux Cored Arc Welding (FCAW).

Looking up from the bottom of a deep drainage tunnel shaft showing concrete walls, ventilation ducts, hydraulic hose, and steel scaffolding used in underground construction.

ID:1762280672 Looking up from the bottom of a deep drainage tunnel shaft showing concrete walls, ventilation ducts, hydraulic hose, and steel scaffolding used in underground construction.

Inspectors are checking defects in welded steel h-beam add joint with process Ultrasonic testing (UT) of Non-Destructive Testing(NDT)

ID:506247786 Inspectors are checking defects in welded steel h-beam add joint with process Ultrasonic testing (UT) of Non-Destructive Testing(NDT)

在进行渗透剂检测（PT）之前，使用溶剂去除剂喷雾到抹布上清洁焊接表面的步骤。

ID:435276315 在进行渗透剂检测（PT）之前，使用溶剂去除剂喷雾到抹布上清洁焊接表面的步骤。

The step two of doing penetrant testing is step to use spray Liquid Penetrant into the welded so that the liquid penetrates into the defect for Non-Destructive Testing with process Penetrant Testing.

ID:298683992 The step two of doing penetrant testing is step to use spray Liquid Penetrant into the welded so that the liquid penetrates into the defect for Non-Destructive Testing with process Penetrant Testing.

Checking defect in welded with process Magnetic Particle Testing(MT) of Non-Destructive Testing(NDT) at industrial factory.

ID:500745676 Checking defect in welded with process Magnetic Particle Testing(MT) of Non-Destructive Testing(NDT) at industrial factory.

按照工业工厂钢结构工程的项目规范，用涂层测厚仪测量镀锌涂层的厚度

ID:807112206 按照工业工厂钢结构工程的项目规范，用涂层测厚仪测量镀锌涂层的厚度

The welder is welding a steel structure work with process Flux Cored Arc Welding(FCAW) and dressed properly with personal protective equipment(PPE) for safety, at industrial factory.

ID:343156407 The welder is welding a steel structure work with process Flux Cored Arc Welding(FCAW) and dressed properly with personal protective equipment(PPE) for safety, at industrial factory.

Use a Brush and Apply Liquid Penetrant into the Welding line of stainless steel pipes for Non-Destructive Testing(NDT) with process Penetrant Testing(PT).

ID:749994093 Use a Brush and Apply Liquid Penetrant into the Welding line of stainless steel pipes for Non-Destructive Testing(NDT) with process Penetrant Testing(PT).

检查员正在对焊接钢梁加节点进行超声波无损检测以检查缺陷

ID:701767723 检查员正在对焊接钢梁加节点进行超声波无损检测以检查缺陷

检查员正在使用无损检测 (NDT) 的超声波检测 (UT) 流程检查焊接钢 H 型梁附加接头中的缺陷

ID:569606440 检查员正在使用无损检测 (NDT) 的超声波检测 (UT) 流程检查焊接钢 H 型梁附加接头中的缺陷

Step to use rag wipe Liquid Penetrant out to welded surface before Developer spray into the welded for Non-Destructive Testing(NDT) with process Penetrant Testing(PT).

ID:374707343 Step to use rag wipe Liquid Penetrant out to welded surface before Developer spray into the welded for Non-Destructive Testing(NDT) with process Penetrant Testing(PT).

Checking defect in welded of steel add joint with process Ultrasonic testing (UT) of Non-Destructive Testing(NDT), focus on hand that conducts the welding test.

ID:304150500 Checking defect in welded of steel add joint with process Ultrasonic testing (UT) of Non-Destructive Testing(NDT), focus on hand that conducts the welding test.

检查员正在对焊接钢梁附加接头进行无损检测（NDT）的超声波检测（UT）中的缺陷进行检查

ID:621586217 检查员正在对焊接钢梁附加接头进行无损检测（NDT）的超声波检测（UT）中的缺陷进行检查

Robotic Welding Machine, Technicians Welding a Steel Plate of Steel Structure with Robotic Welding or Robotic Arm Welding at Industrial Factory.

ID:575977919 Robotic Welding Machine, Technicians Welding a Steel Plate of Steel Structure with Robotic Welding or Robotic Arm Welding at Industrial Factory.

Visual Inspection (VI) or Visual Testing (VT), Marking Defects on Welded with Solid Marker.

ID:576011681 Visual Inspection (VI) or Visual Testing (VT), Marking Defects on Welded with Solid Marker.

钢和焊接在焊接完成后的热影响区（HAZ）的布氏硬度测试

ID:325431965 钢和焊接在焊接完成后的热影响区（HAZ）的布氏硬度测试

Step to use Developer spray into the welded for Non-Destructive Testing(NDT) with process Penetrant Testing(PT).

ID:298680334 Step to use Developer spray into the welded for Non-Destructive Testing(NDT) with process Penetrant Testing(PT).

Young girl is drinking soft drink.

ID:299785485 Young girl is drinking soft drink.

Welder is welding add joint h-beam for steel structure work with process Flux Cored Arc Welding(FCAW) and dressed properly with personal protective equipment(PPE) for safety, at industrial factory.

ID:489710878 Welder is welding add joint h-beam for steel structure work with process Flux Cored Arc Welding(FCAW) and dressed properly with personal protective equipment(PPE) for safety, at industrial factory.

Checking defect in welded with process Magnetic Particle Testing(MT) of Non-Destructive Testing(NDT) at industrial factory.

ID:435471502 Checking defect in welded with process Magnetic Particle Testing(MT) of Non-Destructive Testing(NDT) at industrial factory.

Checking defect in welded with process Magnetic Particle Testing(MT) of Non-Destructive Testing(NDT) at industrial factory.

ID:325432041 Checking defect in welded with process Magnetic Particle Testing(MT) of Non-Destructive Testing(NDT) at industrial factory.

Step to Non-Destructive Testing(NDT) of welding with process Magnetic Particle Testing(MT).

ID:298682568 Step to Non-Destructive Testing(NDT) of welding with process Magnetic Particle Testing(MT).

目视检查（VI）或目视检测（VT），用固体标记笔标记焊接缺陷

ID:570933656 目视检查（VI）或目视检测（VT），用固体标记笔标记焊接缺陷

Industrial Worker Cutting Steel Pipe with a CUT-OFF Machine in a Factory, Wearing a Safety Helmet, Gloves, and Protective Gear, Sparks flying from the Cutting Process.

ID:1736385041 Industrial Worker Cutting Steel Pipe with a CUT-OFF Machine in a Factory, Wearing a Safety Helmet, Gloves, and Protective Gear, Sparks flying from the Cutting Process.

建筑工地上，工人穿着防护装备为镀锌钢结构涂漆，以防止生锈并提高工业金属框架的耐用性。

ID:1736384999 建筑工地上，工人穿着防护装备为镀锌钢结构涂漆，以防止生锈并提高工业金属框架的耐用性。

Measure the Coating Thickness Galvanized with a Coating Thickness Gauge by Specification of Project for Steel Structure Work at Industrial Factories.

ID:1754881334 Measure the Coating Thickness Galvanized with a Coating Thickness Gauge by Specification of Project for Steel Structure Work at Industrial Factories.

Measure the Coating Thickness Galvanized with a Coating Thickness Gauge by Specification of Project for Steel Structure Work at Industrial Factories.

ID:1754881331 Measure the Coating Thickness Galvanized with a Coating Thickness Gauge by Specification of Project for Steel Structure Work at Industrial Factories.

Measure the Coating Thickness Galvanized with a Coating Thickness Gauge by Specification of Project for Steel Structure Work at Industrial Factories.

ID:1754881320 Measure the Coating Thickness Galvanized with a Coating Thickness Gauge by Specification of Project for Steel Structure Work at Industrial Factories.

Measure the Coating Thickness Galvanized with a Coating Thickness Gauge by Specification of Project for Steel Structure Work at Industrial Factories.

ID:1754881317 Measure the Coating Thickness Galvanized with a Coating Thickness Gauge by Specification of Project for Steel Structure Work at Industrial Factories.

Inspectors are checking defects in welded steel plate add joints with process Ultrasonic testing (UT) of Non-Destructive Testing(NDT) at the industrial factory.

ID:1754881315 Inspectors are checking defects in welded steel plate add joints with process Ultrasonic testing (UT) of Non-Destructive Testing(NDT) at the industrial factory.

焊接中的气孔或簇状气孔，药芯焊丝电弧焊（FCAW）焊接工艺的缺陷

ID:1075168192 焊接中的气孔或簇状气孔，药芯焊丝电弧焊（FCAW）焊接工艺的缺陷

焊接中的孔隙或虫洞，药芯焊丝电弧焊（FCAW）焊接工艺缺陷

ID:389942128 焊接中的孔隙或虫洞，药芯焊丝电弧焊（FCAW）焊接工艺缺陷

在进行渗透剂测试（PT）的无损检测（NDT）之前，使用溶剂去除剂喷雾喷到抹布上清洁焊接表面的步骤

ID:325781479 在进行渗透剂测试（PT）的无损检测（NDT）之前，使用溶剂去除剂喷雾喷到抹布上清洁焊接表面的步骤

橙色背景下的螺距规或螺纹规

ID:438217466 橙色背景下的螺距规或螺纹规

How to use a brush to clean the welding surface before performing Non-Destructive Testing(NDT) with process Magnetic Particle Testing(MT)

ID:298680561 How to use a brush to clean the welding surface before performing Non-Destructive Testing(NDT) with process Magnetic Particle Testing(MT)

The step two of doing penetrant testing is step to use spray Liquid Penetrant into the brush before apply to the welded for Non-Destructive Testing(NDT) with process Penetrant Testing(PT).

ID:376090312 The step two of doing penetrant testing is step to use spray Liquid Penetrant into the brush before apply to the welded for Non-Destructive Testing(NDT) with process Penetrant Testing(PT).

Tensile test is used to determine the strength of a metal or alloy by means of a short-time pull at a constant rate. The test samples will look different for metals, they may be sheet or bar.

ID:408563035 Tensile test is used to determine the strength of a metal or alloy by means of a short-time pull at a constant rate. The test samples will look different for metals, they may be sheet or bar.

Tools and equipment for Non-Destructive Testing(NDT) of welding. with process Magnetic Particle Testing(MT).

ID:409689992 Tools and equipment for Non-Destructive Testing(NDT) of welding. with process Magnetic Particle Testing(MT).

交付到工作现场之前热浸镀锌后的存储区钢结构扶手。

ID:408099711 交付到工作现场之前热浸镀锌后的存储区钢结构扶手。

在工业工厂中使用磁粉检测（MT）检查焊接中的缺陷

ID:367812900 在工业工厂中使用磁粉检测（MT）检查焊接中的缺陷

焊接的无损检测（NDT）步骤，采用超声波检测（UT）工艺

ID:298683359 焊接的无损检测（NDT）步骤，采用超声波检测（UT）工艺

Step to use solvent remover spray into the rag to cleaning the welded surface before performing spray Liquid Penetrant for Non-Destructive Testing(NDT) with process Penetrant Testing(PT).

ID:374707187 Step to use solvent remover spray into the rag to cleaning the welded surface before performing spray Liquid Penetrant for Non-Destructive Testing(NDT) with process Penetrant Testing(PT).

Step to use spray White Contrast on the welded surface before performing Non-Destructive Testing(NDT) with process Magnetic Particle Testing(MT).

ID:298682497 Step to use spray White Contrast on the welded surface before performing Non-Destructive Testing(NDT) with process Magnetic Particle Testing(MT).

Step to use solvent remover spray into the rag to cleaning the welded surface before performing spray Liquid Penetrant for Non-Destructive Testing(NDT) with process Penetrant Testing(PT).

ID:376090199 Step to use solvent remover spray into the rag to cleaning the welded surface before performing spray Liquid Penetrant for Non-Destructive Testing(NDT) with process Penetrant Testing(PT).

用手动气割炬切割 H 型钢

ID:331731949 用手动气割炬切割 H 型钢

Using Vernier caliper to measure the dimensions of the nut.

ID:298875497 Using Vernier caliper to measure the dimensions of the nut.

Welder is welding add joint h-beam for steel structure work with process Flux Cored Arc Welding(FCAW) and dressed properly with personal protective equipment(PPE) for safety, at industrial factory.

ID:448617341 Welder is welding add joint h-beam for steel structure work with process Flux Cored Arc Welding(FCAW) and dressed properly with personal protective equipment(PPE) for safety, at industrial factory.

Welder is welding built-up H-Beam with process Submerged Arc Welding(SAW) at industrial factory.

ID:434366210 Welder is welding built-up H-Beam with process Submerged Arc Welding(SAW) at industrial factory.

Floating Solar Farm or Solar panels on the water

ID:298686918 Floating Solar Farm or Solar panels on the water

The step fourth of doing penetrant testing is step to use Developer spray into the welded to pull the liquid penetrate from the defect for Non-Destructive Testing with process Penetrant Testing(PT)

ID:376090480 The step fourth of doing penetrant testing is step to use Developer spray into the welded to pull the liquid penetrate from the defect for Non-Destructive Testing with process Penetrant Testing(PT)

Exposed Aggregate Finish, textures and background of stone.

ID:298677401 Exposed Aggregate Finish, textures and background of stone.

The welder is welding add joint a steel plate with process Submerged Arc Welding(SAW) at industrial factory.

ID:359953218 The welder is welding add joint a steel plate with process Submerged Arc Welding(SAW) at industrial factory.

Technicians are measuring the Dry Film Thickness (DFT) for painting of steel structure work in industrial factory. focus on hand.

ID:302453666 Technicians are measuring the Dry Film Thickness (DFT) for painting of steel structure work in industrial factory. focus on hand.

拉伸试验用于通过恒速短时间拉伸来确定金属或合金的强度。测试样品对于金属来说看起来会有所不同，它们可能是板材或棒材。

ID:482871909 拉伸试验用于通过恒速短时间拉伸来确定金属或合金的强度。测试样品对于金属来说看起来会有所不同，它们可能是板材或棒材。

Steel from destructive testing (DT) is Bending test, Macro test, Tensile test and Impact test, on black background.

ID:409921833 Steel from destructive testing (DT) is Bending test, Macro test, Tensile test and Impact test, on black background.

Tensile test is used to determine the strength of a metal or alloy by means of a short-time pull at a constant rate. The test samples will look different for metals, they may be sheet or bar.

ID:407464881 Tensile test is used to determine the strength of a metal or alloy by means of a short-time pull at a constant rate. The test samples will look different for metals, they may be sheet or bar.

按照工业工厂钢结构工程的项目规范，用涂层测厚仪测量镀锌涂层厚度

ID:807112223 按照工业工厂钢结构工程的项目规范，用涂层测厚仪测量镀锌涂层厚度

焊缝中的孔隙或虫洞，焊接工艺缺陷 药芯焊丝电弧焊（FCAW）

ID:398486404 焊缝中的孔隙或虫洞，焊接工艺缺陷 药芯焊丝电弧焊（FCAW）

Welder is welding added joint a pipe carbon for steel structure work with process Flux Cored Arc Welding(FCAW) and dressed properly with personal protective equipment(PPE) for safety.

ID:617086063 Welder is welding added joint a pipe carbon for steel structure work with process Flux Cored Arc Welding(FCAW) and dressed properly with personal protective equipment(PPE) for safety.

合金管和焊接的布氏硬度测试在焊后热处理（PWHT）之后

ID:399068285 合金管和焊接的布氏硬度测试在焊后热处理（PWHT）之后

在交付到现场前用棘轮夹或杠杆夹固定拖车上的钢梁

ID:393138119 在交付到现场前用棘轮夹或杠杆夹固定拖车上的钢梁

Apply Liquid Penetrant into the welded so that the liquid penetrant into the defect for Non-Destructive Testing(NDT) with process Penetrant Testing(PT).

ID:298684423 Apply Liquid Penetrant into the welded so that the liquid penetrant into the defect for Non-Destructive Testing(NDT) with process Penetrant Testing(PT).

机器人焊接机，在工业工厂用机器人焊接或机械臂焊接钢结构的钢板

ID:575694377 机器人焊接机，在工业工厂用机器人焊接或机械臂焊接钢结构的钢板

A welder is using a Stud Welding Machine to weld stud bolt on steel plate, at industrial factory.

ID:423002083 A welder is using a Stud Welding Machine to weld stud bolt on steel plate, at industrial factory.

在一家工业工厂里，一名焊工正在用药芯焊丝电弧焊焊接钢结构的加强筋。

ID:531472821 在一家工业工厂里，一名焊工正在用药芯焊丝电弧焊焊接钢结构的加强筋。

Workers are using a Impact Wrench to torque bolts to hold the splice plate with steel girder at splice joint of steel structure work.

ID:410673463 Workers are using a Impact Wrench to torque bolts to hold the splice plate with steel girder at splice joint of steel structure work.

在横截面、纵截面或'Z'方向（厚度方向）进行宏观测试，作为独立测试以评估地下状况或揭示对地下的影响

ID:407265824 在横截面、纵截面或'Z'方向（厚度方向）进行宏观测试，作为独立测试以评估地下状况或揭示对地下的影响

在工业工厂中用手持气割炬切割 H 型钢

ID:510893536 在工业工厂中用手持气割炬切割 H 型钢

1/10
  • 总页数10页

京ICP备15019536号 增值电信业务经营许可证 京B2-20210167京公网安备 京公网安备 11010502045846号 网络文化经营许可证 京网文〔2023〕2258-086号网信算备：110105951222401250011号